Size: 15"
Power Rating: 1700W AES
Freq. Response: 55-2kHz
Sensitivity: 96db
Impedance: 8 ohms
Voice Coil: 4.5" edge wound
Resonant Frequency: 57 Hz
Magnet Weight: 25.5 oz. neodymium
The SD15-1700N is a high output wide bandwidth transducer. The 15 inch(381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level low frequency and full range response. This design is optimized for both live sound and recorded music venues.
The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD15-1700N has been optimized for use in two and three way sound reinforcement system designs. The operating bandwidth is 55Hz to 2000Hz. The SD15-1700N employs a large 4.5 inch (114.3mm) diameter voice coil that provides an AES rated 1700 watts of continuous power handling and a full 6800 watts of peak rated power handling when sufficient amplifier headroom is available.
The SD15-1700N utilizes P Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside/outside geometry with P Audio's precision flat wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy.
The system suspension has been designed specifically for high linear displacement for both low frequency and mid band response. The double spider design insures very high displacement and linear response while maintaining excellent control. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
No comments:
Post a Comment