L18P300ND Neodymium Subwoofer

Light Weight Alternative to the L18P300
Size: 18"
Power Rating: 1000W AES
Frequency Response: 35-1kHzSensitivity: 97db
Impedance: 8 ohmsVoice Coil: 4" copperResonant Frequency: 33 HzWeight: 6.5 lbs.

The L18P300ND is derived from L18P300 and manufactured with a newly designed Neodymium magnet that provides improved ventilation under the top plate. This new model is perfectly compatible with the ferrite version both in size and performance but with a much reduced weight.

The neo magnetic assemblies use 15mm thickness plates that ensure a high flux density in the gap, low power compression and excellent heat dissipation. A specially designed M-roll suspension combined with a double silicon spider ensure an excellent linear piston control and undistorted low frequency reproduction at very high power. The voice coil is constructed using a fiberglass former treated with high temperature resin adhesives while the coil is wound in inside/outside typology to provide a very high thermal stability and durability at high power levels.

Specifications: 4-inch, fiberglass inside-outside copper voice coil; 2000W continuous program power handling; 97dB Sensitivity; 35Hz -1KHz Frequency range; Forced air ventilation and 15mm top plate for minimum power compression; Dual spider design with silicon based dampening control; M-roll surround and exponential cone geometry; Neo magnetic assembly.

The net weight of L18P300ND is half of the ferrite version. Push buttons are easier to use; Larger fixing holes; Improved ventilation under the top plate; Smaller overall diameter for easier installation.